Difference between revisions of "3D Printing (archived)"
(Created page with "==Lab 3D Printers== FamiLAB has a few members who are interested in 3D printing and the community surrounding it. Since most of the consumer-level 3D printers ([http://www.reprap...")
Revision as of 05:16, 26 September 2011
Lab 3D Printers
FamiLAB has a few members who are interested in 3D printing and the community surrounding it. Since most of the consumer-level 3D printers (RepRap, , etc.) use the same methods of operation, we help each other out in getting our machines up and running, and keeping them operational. We are looking into holding some sort of meetings for those interested in the FDM method of 3D printing, or who would like to print parts they have designed. For now, here is a list of members who have 3D printers or are in the process of building them:
BreepBroop (nickname) is a standard RepRap Mendel design 3D FDM printer. Chorca is currently working on rebuilding it with newer components.
Digitalman2112's RepRap has printed some small basic objects, but requires work to get fully operational. He plans to get it fully up and running in the coming months.
Mack has a MakerBot CupCake 3D printer. He originally purchased it to build the parts for a RepRap, which he did, however, he is now looking to a newer version to build.
Mackerbot (nickname) is a slightly modified MakerBot Cupcake printer. It has had it's Gen 2 extruder replaced with a Wade's extruder, and the hot end is a MakerGear Power Resistor. It uses modified Stepper Driver 3.0's, and has a TechZone extruder controller. Mack is currently in the process of installing a Low Rider kit to improve the build height capabilities.