FamiLAB 10x is the working name of our new space! The name stems from the fact that it's 10 times the size of our previous space.
- 1 New Address
- 2 Preliminary Rules
- 3 Current Layout
- 4 Utilities / Services
- 5 Stuff to purchase
- 6 Stuff being donated or "leased" to FamiLAB
- 7 Potential Zones of Workspace
- 8 Personal Work Carts
- 9 Proposed modifications
1355 Bennett Dr. Unit 129 Longwood, FL 32750
We'll get together to agree on a set of rules for the new space. For the time being, please adhere to the following:
- No modification of walls, electrics, plumbing, etc. until we have a process in place. We need to build consensus on any changes.
- We have to run modifications by the landlord (who is also a member).
- During the move, we are only bringing in what is in the existing space. Anything above and beyond that should be agreed to by the membership. Ten times more space doesn't mean ten times the junk.
- Don't "claim" space. Again, we need to come up with a process to balance personal property with the needs of the space, and get everyone to agree on it.
- Don't fill up the dumpster at either the current space or the new one.
Updated 12/1/11 by David Woods. (note: A/C Units in offices are above ceiling.)
Utilities / Services
- See Treasurer (Ian) for details / questions
- Dumpster (Locking) - 2 cubic yard dumpster, every other week pickup, $45 ($35 + fuel charge) per month starting Dec 1st. UPDATE: Delivered.
- Liability Insurance - $1M policy, effective Dec 1st
- Progress Energy - We pay 6.173 cents / KWH energy charge, 4.776 cents / KWH fuel charge + 25.22% fees / taxes - which means approx. 13.710 cents / kwh... PLEASE CONSERVE POWER - THIS IS OUR LARGEST MONTHLY FINANCIAL RISK!
- Internet - 8 down, 1.5 up (possible static ip), being funded by the building owner. In return, we will manage an internet-connected security system. Installed Dec 1. UPDATE: Installed. 8/1Mbit dynamic IP
Stuff to purchase
- Ian started an Amazon Wishlist for FamiLAB 10x - http://amzn.com/w/FC8KA1DVJMEC email him to add stuff, or post links here :)
- Folding chairs + rack to store/move them
- Banquet tables
- Full size refrigerator
- Parts Storage: Extreme Makeover Lab Edition
- Raw materials rack (for plywood, acrylic, etc)
- Railing or similar preventative measure for dock high area
- Short throw projector for classroom area
- Open/Closed sign for the public? Maybe a FamiLAB custom build?
Stuff being donated or "leased" to FamiLAB
- Pledged Equipment - Can get preliminary approval to bring this stuff to the lab from the membership?
Potential Zones of Workspace
- "Store Front" for visitors and first impressions
- Brochures and membership packets
- RFID registration capability
- Finished project museum
- Classroom & Presentation room
- "Think Lab" for coworking and basic hand tool use
- "Make Lab" for high end equipment
- Soft hacking area (sewing machines, kiln, etc)
- Soldering & Rework area
- 3d printer village
- Stage for famiband & DJ booth
Personal Work Carts
Personal Work Carts <- This concept now has its own page!
- Any electrics must be up to code. In conduit at a minimum.
- 3 phase available, not in our panel.
- Dave Woods has an electrician.
- Microwave, Toaster
- Outlets (GFCI)
Door to shop
- The current opening is an "exact" fit (more or less) for a standard sliding patio door. This means we could avoid any significant framing or drywall work. Simply install the door and trim it.
- This would give us a nice "fishbowl" into the shop so people could see what's going on. Would also provide a nice experience for people touring the shop.
- Matt has looked into used doors from various sources but they are difficult to find and will be of questionable quality.
- Lowes sells a double-glazed, insulated door for $269 that is buttery smooth and would do nicely :) Link
- Occupancy limits
- Structural improvements (stairs!) - good links on building stairs - http://www.woodworkersworkshop.com/resources/index.php?cat=469
- More fire extinguishers
- More eyewash
- Directions to the hospital http://g.co/maps/jtne5
RFID Access Control
Front door to start - Aaron has the lead-- Initial install and set up complete
Parts to be ordered
Will use off the shelf HID reader with Arduino backend
- Later: Nanode + web enabled RFID activate/deactivate/monitoring
- Later: door to shop
- Later: major equipment control
- Project to monitor our electrical consumption and avoid power bill surprises
- Some great open-source projects out there - see http://openenergymonitor.org/emon/ for one example
- Need someone to propose a budget and then own the project - this will be a huge part of how we maximize our funds!
- Ian will donate a Nanode to this cause...
- Skycraft has some nice big transformers for current monitoring, I think
- Glass/acrylic blocks in lounge area. Giant VU meter, restroom occupancy sensor, etc.
- Walk / Don't walk sign to indicate restroom in use...
- Decorate front "lounge" room
- Mural in shop area
- Pulley / Cable system to allow art to be done on thin plywood, then hung high on the walls. Pulleys + cables allows changing / working on the art without ladder or lift...
- Classroom project headed up by Mike K.