Workshop and Class Ideas

From FamiLAB Wiki
(Difference between revisions)
Jump to: navigation, search
(Added future Eagle PCB layout class)
(Intro to Urethane Plastic Casting)
 
Line 104: Line 104:
 
*** Nominally the material is white.
 
*** Nominally the material is white.
 
*** Colorants will be available.
 
*** Colorants will be available.
*** If there is sufficient interest a clear material will be available.  (The material comes in 1 quart minimum.) A student could purchase an entire quart of their desired material if so inclinded.
+
*** The material comes in 1 quart minimum. A student could purchase an entire quart of their desired material if so inclinded.
 
* The students will be expected to pay for the materials on the basis of volume.  Cost is estimated at about $30/quart based on the casting container size.  It will be necessary for them to pre-register to make sure sufficient materials are on hand.
 
* The students will be expected to pay for the materials on the basis of volume.  Cost is estimated at about $30/quart based on the casting container size.  It will be necessary for them to pre-register to make sure sufficient materials are on hand.
 
* The format will be a classroom demonstration followed by a workshop where each student makes their own casting.
 
* The format will be a classroom demonstration followed by a workshop where each student makes their own casting.
Line 114: Line 114:
 
** Measuring and Mixing Materials
 
** Measuring and Mixing Materials
 
** Items affecting casting quality
 
** Items affecting casting quality
* It is expected this could take place in the conference room if provision can be made to control spills.  Each student should have about 6 square feet of table space to help prevent spills.  Casting material in the carpet is irreversible.
+
* It is expected this will take place in the lab.  Each student should have about 6 square feet of table space to help prevent spills.
  
 
== Wordpress Blogging 101 ==
 
== Wordpress Blogging 101 ==

Latest revision as of 03:13, 12 April 2012

Old page was archived Workshop_and_Class_Ideas_(Archived)

This page is for potential instructors to put forth an idea for a workshop or class. Feel free to create a dedicated page if necessary!

If you're wondering what the steps are to hold a class, check out How_to:_Classes,_Workshops_and_Events.

Scheduled classes are on our Public Classes and Events page.

Contents

Unity (3D Engine) class

Intro to Arduino

Advanced Arduino

Arduino + i2c

Intro to FamiLAB

Tracy started thinking about how to structure this class and determined that without a clear idea of the mission (and whatever policies or rules get written as a by-product of the mission), it's hard to make a lot of headway on this. Once the mission workshop happens it will be easier.

How to Teach a Class class and workshop

This class will run about two hours total -- one hour of organized instruction followed by an hour of open lab where you can work on a lesson plan and get feedback.

You will get the most benefit from this class if you come with an idea in mind of what class you would like to teach. We'll use your ideas as our working examples.

We'll talk about how to create instructional objectives expressed in terms of what the successful student will know or be able to do at the conclusion of the class, which is arguably the single most important concept in all of education and the one that most non-teachers do poorly or not at all.

We'll talk about how "props and sets" affect learning and what you can do about it.

You'll get a lesson plan template that will greatly increase your chances of having and doing everything necessary for a successful class.

After the hour of "structured" instruction, we'll have an hour of open lab where you'll complete a lesson plan template for your own class and get as much feedback as you need.

The only materials needed or provided are a few pieces of paper, so there won't be a charge for the class. Students will want to bring along their own note paper and a pen or pencil. Tablet computers will be permitted for this purpose, but please leave your laptops in the other room during the instruction hour so we can all see each other without looking over the wall of a screen. Laptops are welcome during the workshop portion.

Developing a Mission Statement

New mission statement created at the mission workshop:


FamiLAB is a community that fosters learning and creativity through hands-on projects, collaboration, and the sharing of skills and tools to improve ourselves and enrich the world around us.

Slide Rules 101

Introduction to Metasploit Workshop & Class (Hands On)

Information Security Basics: Self Defense (Class/Presentation)

Web Application Security Basics: OWASP Top 10 Exploits & Mitigations (Class/Presentation)

Intro to the Laser cutter

Intro to Urethane Plastic Casting

Wordpress Blogging 101


Wordpress Admin 101

xbee 101: Telekinesis and Jedi Mind Tricks

The Bus Pirate is Awesome

Learn how to make a circuit board

Personal tools
Namespaces
Variants
Actions
Navigation
Toolbox