Phineas
(→Notes) |
|||
| Line 62: | Line 62: | ||
===Notes=== | ===Notes=== | ||
* Turn on & off fan in D9 with M106 | * Turn on & off fan in D9 with M106 | ||
| + | * [http://reprapfordummies.net/index.php?option=com_content&view=article&id=49:sfact-homepage&catid=44:gcode-generators&Itemid=66 Calibrating SFACT - DO THIS] | ||
Revision as of 13:41, 2 October 2011
ACTIVELY BUILDING THIS PAGE FROM A COPY OF THE BREEPBROOP PAGE, WORK IN PROGRESS
Information
Pic goes here
Link to raising geeks goes here
General
Phineas (nickname) is a RepRap Prusa Mendel, built from a MakerGear Prusa Mendel Kit.
It was purchased and built by Ian (Digitalman2112) between April and June of 2011.
Photos
Warning, I make mistakes, and sometimes the mistakes stay in the photos - don't use these as your only reference :)
Build Photos - Heated Build Platform
Documentation
MakerGear Prusa Build Instructions - These are a complement to the Visual Prusa Instructions
Electronics
- RAMPS
- Polulu
- Fan for Polulu
- Power Supply
- ???
Mechanical
No mods, yet. Note that Rick from Makergear prints with his X "backwards", so the X endstop needs to be reworked to be "correct"
Software
Ian (user link) is currently using the following:
- skeinforge link
- firmware TBD
Print Status
The printer is not printing. Ian hasn't been spending the needed time, had a bunch of self-inflicted heater core issues, and just generally hasn't worked through it...
Current Work
Electronics
- Get the fan on the polulus
Mechanical
- Flatten the stepper shafts and remount the X & Y pulleys - done
- Build and install new hotend - done .35 nozzle
Software
- Pronterface
- 10/2/2011 CURRENT SCREENSHOT OF SETTINGS
Notes
- Turn on & off fan in D9 with M106
- Calibrating SFACT - DO THIS
